Appendix C. Factory Defaults
The Below table shows the factory default settings. When “Factory Reset” is executed, the unit configuration is changed from the user settings to the below default settings.
Section | Function | Default Setting |
|
|
|
SYSTEM | Hotkey | Ctrl + Alt |
| Hotmouse | On / 5 Sec. |
| Quad Mode | Timeout = 5 Sec. |
| OSD Position | Centered |
| OSD Language | English |
| Security | None (Level 0) |
| Test Pattern | None |
| Disable Channel | None |
| Control | Off |
|
|
|
MODE | Pip | Size = 15%; Zoom = 1; Mode = triple; gap, |
|
| Offset = 0% |
| Start | Quad / active channel = 1 |
|
|
|
CONFIGURE | Backup | User initiated |
| Recall | User initiated |
| Factory Reset | User initiated |
|
|
|
CONSOLE | Video Output | Auto |
| Keyboard | English |
| Monitor 1, 2, 3, 4 = channel 1, 2, 3, 4 | |
| EDID | Display information only |
|
|
|
VIDEO | Video Input | DVI / VGA (all channels) |
| Brightness | 58.2% (all analog channels) |
| Contrast | 63.5% (all analog channels) |
| Horiz. Position | auto (all channels) |
| Vert. Position | auto (all channels) |
| Screen width | +0 (all channels) |
| Phase | +0 (all channels) |
| Format | No (all channels) |
|
|
|
COMPUTER | Keyboard | N/A |
| Mouse | N/A |
| Reset PS/2 | N/A |
| Change EDID / DDC | No |
|
|
|
HELP | Command | N/A (Lists available keyboard commands) |
| About | N/A (Displays unit information, version) |
| Contact | N/A (Displays contact information) |
|
|
|
50 | QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL |
|
|