Execute the Serial Communication software and the window shown below will display.
Click on the 
ICON to connect and display the OSD on the remote computer
Remotely navigate within the OSD menu system from the remote computer the same way as you would using the local console. All OSD menus can be accessed using the arrow keys and the Enter / Select key.
DCP Synchronizing Multiple Units
In systems that use multiple QuadraVista’s, the display mode can be synchronized so all units are the same display mode. To accomplish this, first display the OSD and navigate to the “Control” section (System, Control). Use the up/down arrow keys to select “Synchronization”, then exit the OSD.
Each time you restart a
QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL | 39 |
|
|