CONFIGURATION MENUS
Main configuration menu
UltraView Pro version UP18 Copyright 2000 – 02 Rose Electronics
Main configuration menu
Configure system
Configure computers
Configure overlay
Configure security
Exit
Use arrow keys to highlight selection and press enter or press escape to exit
View/change keyboard, mouse, expansion, and scanning
Figure 5. Main configuration menu
The UltraView Pro uses a command to establish communication to the UltraView Pro and not a CPU. This command input is a press and release of the left control <Ctrl> key, then the command. The command must be entered within 2 seconds of pressing and releasing the left control key or the UltraView Pro re-establishes communication with the connected CPU.
The main configuration menu is accessed from the keyboard by pressing and releasing the left control <Ctrl> key and within 2 seconds pressing the F12 key. The main configuration menu will display on the KVM monitor. From this menu, you can configure the system, configure the connected computers, the appearance or overlay of the displayed menus, and assign unique passwords for accessing the configuration menus and a password for accessing the connected computers. Use the up/down arrow keys to select which section menu to configure and press enter.
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL | 13 |
|
|