Panduit manual Tape Cassette, To change the LS7 tape cassette

Page 13

TAPE CASSETTE

A single LS7 tape cas sette is supplied with this unit. This machine has been designed to allow the tape cassette to be changed quickly and easily.

To change the LS7 tape cassette:

1Remove the back cover by pressing in on the rough area at the top end of the machine and pulling off the cover. Pulling off the back cover lifts up the tape release lever.

2 If a tape cas sette is already installed, remove it by pulling it straight out.

3If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette until there is no slack in the ribbon.

☞If you are using a new tape cassette provided with a stopper, be s ure to remove the stopper before installing the cassette.

Make sure that the end of the tape feeds under the cassette tape guides.

4Insert the tape cassette firmly into the tape compartment, making sure that the entire back of the cassette touches the bottom of the compartment.

☞When inserting the tape cassette, make sure that the inner ribbon does not catch on the corner of the metal guide.

5Attach the back cover by inserting the tab on the bottom end of the cover into the slot on the bottom end of the machine, then pushing down firmly on the top end of the cover until it snaps into place.

6	Turn on the machine if it is off, and then feed the tape to remove any slack by holding
				Feed
	down	Code	and pressing	once.
				Sym.
7	Press in the tape cutter lever to cut off any excess tape.
10

Image 13

Contents Page Contents Page Getting started Safe Operation Practices Introduction and Safe OperationDo Not Operate In An Explosive Environment Do Not Operate In Wet Or Damp AreasInformation to USA Users Information to Canadian Users General Precautions Warranty Information TOP View General DescriptionBottom View LS7 Keyboard & LCD DisplayTo change the batteries BatteriesTo connect the optional AC adapter Optional AC AdapterTo change the LS7 tape cassette Tape CassetteLabel Code Label CodeTape Width Laminated Industrial Tape Laminated Industrial Tape Separator ToolPrint Head & Rollers To clean the print head and rollersPrint head Rollers Tape Cutter To clean the tape cutter bladesBe careful not to touch the cutter blades with bare hands Carrying Case For your Information To turn on the machine Power KEYTo turn off the machine Code KEY Code & Caps KeysTo type capital letters continuous ly Caps KEYLeft Cursor KEY Cursor KeysRight Cursor KEY Down Cursor KEY UP Cursor KEYTo add a space Space KEYIs used to end a Return KEYTo add a new line of text 1John SmithTo apply a selected item 1DATATo delete one character Backspace KEYTo delete a sequence of characters To quit a function without changing your text To delete all of the text Clear FunctionAccented characters Accent FunctionTo type in an accented character Èéëêe Accent1NOË Symbols Symbol FunctionTo type in a symbol 1PHONE To turn on or off the length function Length FunctionTo set the length of the label Length Length inchSize Function Setting Size PointsTape width Sizes in points Size To change the size settingAuto Tape Width Text 12 mmWhile still holding down Code , con Underline Function To change the underline settingUnderline OFFRound Slant DOT Frame FunctionTo change the frame s etting DOT FrameLeft Center Right Horizontal Alignment FunctionAlignment LeftMirror Printing Function To change the mirror printing settingMirror Copies Print KEY, Copies & Feed FunctionsTo use the numbering function Serialization FunctionNumeric SerializeStart Value END ValueRotate Legend Function To enable the rotate legend functionIncrement Repeat Legnd Repeat Legend FunctionRotate Legnd 01.00 Line Drawing Function To enable/dis able the line functionVertcl Line Right EdgeIncrement by PressFunction To enable the page function1A207 LabelStoring Text Memory File FunctionsTo store a text file Deleting a File Recalling TextTo overwrite the stored file with the new one To recall a text filePress Or pres s just BS Press the key File StoreRecall FileFile Clear Barcode Function Symbol Character To change the barcode parameter settingsTo add a special character to the barcode data To add the barcode to your textTo delete the barcode from your text Width Small CodeCheck DIG OFF Check DIGCode Problem Remedy TroubleshootingLabel Code Error Message List Empt Y BufferFUL L CAN’TFunction ProblemNot Allowed InvalidSE T ErrorLengt H SystemHardware Technical Support ContactsSoftware LCD