Panduit LS7 manual Troubleshooting, Problem Remedy, Label Code

Page 68

TROUBLESHOOTING

	Problem				Remedy
	Problem				Remedy

1.	The printer is asking for	•	Enter LABEL CODE printed on tape cassette.
	“LABEL CODE”.

2.	The dis play stays blank	•	Check that the correct AC adapter (LS7-ACS) is
	after you have turned on		being used and that it is connected correctly.
	the machine.	•	If you are using alkaline batteries, check that they
			are correctly inserted.
		• If the batteries are low, replace them with new
			ones.

3.	The machine does not print	•	Check that the correct AC adapter (LS7-ACS) is
	or the printed characters		being used and that it is connected correctly.
	are blurred.	•	Check that the tape cassette has been inserted
			properly.
		• If the tape cassette is empty, replace it with a new
			one.
		•	Make s ure that the back cover has been attached.

4.	The text files that you	•	If the batteries are low, replace them with new
	stored in the memory are		ones.
	no longer there.

5.	The printed characters are	•	If you are using alkaline batteries, they may be
	not formed properly.		low. Try using the AC adapter or replace the
			batteries with new ones .
		•	Check that the correct AC adapter (LS7-ACS) is
			being used and that it is connected correctly.

6.	A blank horizontal white	•	Clean the print head as explained on page 13 and
	line appears through the		14.
	printed label.

7.	Striped tape appears .	•	You have reached the end of the tape.
			Replace the tape cassette with a new one.

8.	The machine has “locked	•	Turn off the machine, and then while holding
	up” (i.e., nothing happens
	up” (i.e., nothing happens		down		and	Clear	, turn the machine back
	when a key is pressed).		down	Code	and	BS	, turn the machine back

			on. WARNING: The text in the display, all format
			settings, and all text files s tored in the memory are
			erased.

65

Image 68

Contents Page Contents Page Getting started Introduction and Safe Operation Safe Operation PracticesDo Not Operate In An Explosive Environment Do Not Operate In Wet Or Damp AreasInformation to USA Users Information to Canadian Users General Precautions Warranty Information Bottom View General DescriptionTOP View Keyboard & LCD Display LS7Batteries To change the batteriesOptional AC Adapter To connect the optional AC adapterTape Cassette To change the LS7 tape cassetteTape Width Label CodeLabel Code Laminated Industrial Tape Separator Tool Laminated Industrial TapeTo clean the print head and rollers Print Head & RollersPrint head Rollers Be careful not to touch the cutter blades with bare hands To clean the tape cutter bladesTape Cutter Carrying Case For your Information To turn off the machine Power KEYTo turn on the machine Code & Caps Keys Code KEYCaps KEY To type capital letters continuous lyRight Cursor KEY Cursor KeysLeft Cursor KEY UP Cursor KEY Down Cursor KEYSpace KEY To add a spaceReturn KEY Is used to end a1John Smith To add a new line of text1DATA To apply a selected itemTo delete a sequence of characters Backspace KEYTo delete one character To quit a function without changing your text Clear Function To delete all of the textTo type in an accented character Accent FunctionAccented characters 1NOË AccentÈéëêe To type in a symbol Symbol FunctionSymbols 1PHONE To set the length of the label Length FunctionTo turn on or off the length function Length inch LengthTape width Sizes in points Setting Size PointsSize Function To change the size setting SizeAuto Tape Width Text 12 mmWhile still holding down Code , con To change the underline setting Underline FunctionUnderline OFFTo change the frame s etting Frame FunctionRound Slant DOT Frame DOTHorizontal Alignment Function Left Center RightAlignment LeftMirror To change the mirror printing settingMirror Printing Function Print KEY, Copies & Feed Functions CopiesSerialization Function To use the numbering functionSerialize NumericStart Value END ValueTo enable the rotate legend function Rotate Legend FunctionIncrement Rotate Legnd Repeat Legend FunctionRepeat Legnd 01.00 To enable/dis able the line function Line Drawing FunctionVertcl Line Right EdgePress Increment byTo enable the page function FunctionLabel 1A207To store a text file Memory File FunctionsStoring Text Recalling Text Deleting a FileTo overwrite the stored file with the new one To recall a text fileFile Store Press Or pres s just BS Press the keyFile RecallFile Clear Barcode Function To change the barcode parameter settings Symbol CharacterTo add a special character to the barcode data To add the barcode to your textTo delete the barcode from your text Code Width SmallCheck DIG OFF Check DIGCode Label Code TroubleshootingProblem Remedy Error Message List Buffer Empt YFUL L CAN’TProblem FunctionNot Allowed InvalidError SE TLengt H SystemTechnical Support Contacts HardwareSoftware LCD