Panduit LS7 manual Return KEY, Is used to end a

RETURN KEY

	File
Like on a typewriter or word process or, this machine’s return key (	) is used to end a

line of text and start another one. When you have finished entering one line of text, press the

return key to add a return mark (	) to the end of the line and start a new one.
	File

☞A maximum of four text lines can be entered. If you pres s when the cursor is located in the four th line, the error mes sage “4 LINE LIMIT!” will appear.

The number of text lines that can be printed on the installed tape depends on the tape width.

Tape width		Maximum number of
		lines that can be printed
1/4”	(6 mm)	1
3/8”	(9 mm)	2
1/2” (12 mm)		2
3/4” (18 mm)		4
All Widths		10
Rotated Legend

The return key can also be used to select an item from a list (e.g., add a symbol or accented character to the text) or to apply a selected setting.

Some question asking you to confirm a command may appear on the LCD display, especially when the function that you have chosen will delete or affect text. In these cases, press ing

File

is the same as answering “yes ”.

	Clear
☞	To ans wer “no”, press BS . Refer to BACKSPACE KEY on pages 27 and 28.

24