Panduit LS7 manual Backspace KEY, To delete one character, To delete a sequence of characters

BACKSPACE KEY

Clear

The backspace key ( BS ) allows you to remove characters to the left of the cursor’s current

position. It differs from the left curs or key (), which only moves the cursor without deleting any characters.

The backspace key can also be used to quit most functions and return to the previous display without changing the text.

☞The backspace key cannot be used to quit the barcode function. To quit the barcode

function, hold down Code and press	N	.
	Barcode

Some questions asking you to confirm a command may appear on the LCD display, es pe- cially when the function that you have chosen will delete or affect text . In these cases, press-

	Clear
ing	BS is the same as answering “no”.
			File	. Refer to RETURN KEY on pages 24 to 26.
☞	To ans wer “yes”, press
To delete one character:
1	Press	,	, Home or	to position the cursor below the character immedi-
				End

ately to the right of the one that you wish to delete.

	Clear
2	Press BS once.

To delete a sequence of characters :

1	Press	,	, Home or	to position the cursor below the character immedi-
				End

ately to the right of the last character that you wish to delete.

Clear

2 Hold down BS until all of the characters that you wish to delete are deleted.

EXAMPLE

To delete “9” in lege nd “012-345-6789”:		A A A A A Auto
	Rotate
				Underline
	Caps	1:2-345-6789		Frame
	Repeat		Length
	Legend

27