Panduit LS7 manual Print KEY, Copies & Feed Functions

Page 47

PRINT KEY, COPIES & FEED FUNCTIONS

After you have entered your text and chos en the desired format s ettings, you are ready to print the label.

To print a label:

Press

Copies

once. The message “COPIES 01/01” is displayed while the label is being

Print

printed. The label is fed out of the tape exit slot at the top end of the machine.

To print copies of a label:

Copies

Hold down Code and press Print . The mes sage “COPIES 01” is displayed. Enter

between 01 and 99 copies .

File

Press .

To feed the tape:

Feed

Hold down Code and press Sym. . The message “FEED” appears while 1” (24 mm) of

tape is fed out.

To cut the tape:

Press in the tape cutter lever.

In order to prevent damaging the tape, do not try to cut it while printing or feeding. Pressing in the tape cutter lever too far may break it .

Check your cassette before printing a large number of copies to ensure sufficient tape is available.

EXAMPLE

To make 3 copies of a label:

Copies

1 Hold down Code and press Print .

Rotate A A A

COPIES

Caps 03

 

 

Repeat

 

File

Legend

 

 

2 Enter “03” a nd press

 

.

A A Auto

Underline

Frame

Length

44

Image 47
Contents Page Contents Page Getting started Do Not Operate In Wet Or Damp Areas Introduction and Safe OperationSafe Operation Practices Do Not Operate In An Explosive EnvironmentInformation to USA Users Information to Canadian Users General Precautions Warranty Information Bottom View General DescriptionTOP View LS7 Keyboard & LCD DisplayTo change the batteries BatteriesTo connect the optional AC adapter Optional AC AdapterTo change the LS7 tape cassette Tape CassetteTape Width Label CodeLabel Code Laminated Industrial Tape Laminated Industrial Tape Separator ToolPrint Head & Rollers To clean the print head and rollersPrint head Rollers Be careful not to touch the cutter blades with bare hands To clean the tape cutter bladesTape Cutter Carrying Case For your Information To turn off the machine Power KEYTo turn on the machine Code KEY Code & Caps KeysTo type capital letters continuous ly Caps KEYRight Cursor KEY Cursor KeysLeft Cursor KEY Down Cursor KEY UP Cursor KEYTo add a space Space KEYIs used to end a Return KEYTo add a new line of text 1John SmithTo apply a selected item 1DATATo delete a sequence of characters Backspace KEYTo delete one character To quit a function without changing your text To delete all of the text Clear FunctionTo type in an accented character Accent FunctionAccented characters 1NOË AccentÈéëêe To type in a symbol Symbol FunctionSymbols 1PHONE To set the length of the label Length FunctionTo turn on or off the length function Length Length inchTape width Sizes in points Setting Size PointsSize Function Tape Width Text 12 mm To change the size settingSize AutoWhile still holding down Code , con OFF To change the underline settingUnderline Function UnderlineTo change the frame s etting Frame FunctionRound Slant DOT DOT FrameLeft Horizontal Alignment FunctionLeft Center Right AlignmentMirror To change the mirror printing settingMirror Printing Function Copies Print KEY, Copies & Feed FunctionsTo use the numbering function Serialization FunctionEND Value SerializeNumeric Start ValueRotate Legend Function To enable the rotate legend functionIncrement Rotate Legnd Repeat Legend FunctionRepeat Legnd 01.00 Right Edge To enable/dis able the line functionLine Drawing Function Vertcl LineIncrement by PressFunction To enable the page function1A207 LabelTo store a text file Memory File FunctionsStoring Text To recall a text file Recalling TextDeleting a File To overwrite the stored file with the new onePress Or pres s just BS Press the key File StoreRecall FileFile Clear Barcode Function To add the barcode to your text To change the barcode parameter settingsSymbol Character To add a special character to the barcode dataTo delete the barcode from your text Check DIG CodeWidth Small Check DIG OFFCode Label Code TroubleshootingProblem Remedy Error Message List CAN’T BufferEmpt Y FUL LInvalid ProblemFunction Not AllowedSystem ErrorSE T Lengt HLCD Technical Support ContactsHardware Software