MEMORY FILE FUNCTIONS
You can use the memory to store your most frequently us ed text files. The text remains in the memory, even after all characters are removed from the display using the clear function (see page 29).
When a file is s tored, it is given a number to make recalling it eas ier. A maximum of 9 text files or about 300 characters can be s tored in the memory. A stored text file can contain a maximum of 99 characters.
Since a copy of the stored text file is recalled when the recal l function is used, the text can be edited or printed without changing the originally stored file. When a file is no longer needed or more space is necessary, the memory delete function can be used to delete it.
☞When inser ting new batteries, be sure to insert the new ones within five minutes of removing the old ones, otherwise any text files stored in the memory will be los t (unless the machine is plugged into an electrical outlet with the AC adapter).
STORING TEXT
To store a text file:
|
| File |
1 | Hold down Code and press | . |
2 Press 
or 
until STORE flashes on the display.
File
3 Press 
. The message “STORE SELECT
| Size | Frame |
4 | Press the key ( 1 | to 9 ) of the file number where you wish to store the text. The |
text is stored under the selected file number and the text previously shown in the dis- play reappears .
☞If a file is already s tored under the selected file number, the message “OVER- WRITE?” appears in the dis play and you must decide whether or not to over- write it (delete it from the memory and store the new one).
☞If 300 characters have already been stored, the error message “MEMORY FULL!” appears in the display. If this occurs, an existing text file must be deleted before the new one can be stored.
To quit the store function without storing the text, hold down Code and press
File | Clear |
(or press just | BS ). |
55