Panduit LS7 manual Length Function, To turn on or off the length function

Page 37

LENGTH FUNCTION

Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The length function allows you to set the label length between 0.25" and 11.80" (6.4 and 299.7 mm).

The default length setting is O FF. If ON is selected, the Length indicator at the bottom of the display lights up. The default length when ON is 0.65" (16.5 mm) - the width of a Panduit Modular Jack.

To turn on or off the length function:

		Length
1	While holding down Code	, press Q once to display the current setting (ON or
	OFF).
		Length
2	While still holding down	Code , continue pressing Q until the desired label length

setting is displayed.

☞The Length indicator lights up when ON is selected.

3	Release Code . If ON was selected, the current label length setting is displayed.

To set the length of the label:

4 Use the number keys to enter a length.

File

5 Press .

☞Cut marks are printed on the labels when Length Function is s et.

34

Image 37

Contents Page Contents Page Getting started Safe Operation Practices Introduction and Safe OperationDo Not Operate In An Explosive Environment Do Not Operate In Wet Or Damp AreasInformation to USA Users Information to Canadian Users General Precautions Warranty Information TOP View General DescriptionBottom View LS7 Keyboard & LCD DisplayTo change the batteries BatteriesTo connect the optional AC adapter Optional AC AdapterTo change the LS7 tape cassette Tape CassetteLabel Code Label CodeTape Width Laminated Industrial Tape Laminated Industrial Tape Separator ToolPrint Head & Rollers To clean the print head and rollersPrint head Rollers Tape Cutter To clean the tape cutter bladesBe careful not to touch the cutter blades with bare hands Carrying Case For your Information To turn on the machine Power KEYTo turn off the machine Code KEY Code & Caps KeysTo type capital letters continuous ly Caps KEYLeft Cursor KEY Cursor KeysRight Cursor KEY Down Cursor KEY UP Cursor KEYTo add a space Space KEYIs used to end a Return KEYTo add a new line of text 1John SmithTo apply a selected item 1DATATo delete one character Backspace KEYTo delete a sequence of characters To quit a function without changing your text To delete all of the text Clear FunctionAccented characters Accent FunctionTo type in an accented character Èéëêe Accent1NOË Symbols Symbol FunctionTo type in a symbol 1PHONE To turn on or off the length function Length FunctionTo set the length of the label Length Length inchSize Function Setting Size PointsTape width Sizes in points Size To change the size settingAuto Tape Width Text 12 mmWhile still holding down Code , con Underline Function To change the underline settingUnderline OFFRound Slant DOT Frame FunctionTo change the frame s etting DOT FrameLeft Center Right Horizontal Alignment FunctionAlignment LeftMirror Printing Function To change the mirror printing settingMirror Copies Print KEY, Copies & Feed FunctionsTo use the numbering function Serialization FunctionNumeric SerializeStart Value END ValueRotate Legend Function To enable the rotate legend functionIncrement Repeat Legnd Repeat Legend FunctionRotate Legnd 01.00 Line Drawing Function To enable/dis able the line functionVertcl Line Right EdgeIncrement by PressFunction To enable the page function1A207 LabelStoring Text Memory File FunctionsTo store a text file Deleting a File Recalling TextTo overwrite the stored file with the new one To recall a text filePress Or pres s just BS Press the key File StoreRecall FileFile Clear Barcode Function Symbol Character To change the barcode parameter settingsTo add a special character to the barcode data To add the barcode to your textTo delete the barcode from your text Width Small CodeCheck DIG OFF Check DIGCode Problem Remedy TroubleshootingLabel Code Error Message List Empt Y BufferFUL L CAN’TFunction ProblemNot Allowed InvalidSE T ErrorLengt H SystemHardware Technical Support ContactsSoftware LCD