Planet Technology WAP-6100 Wireless Station List, Current IP Settings, Current Wireless Settings

Page 15

Current IP Settings

This section shows current IP address setting including IP address, Subnet Mask, Default Gateway and DHCP status.

Current Wireless Settings

This area shows current wireless setting including operation mode, wireless mode, SSID, channel and security setting.

4.1.2 Wireless Station List

This page can help user identify current clients who already associated to the WAP-6100. You can also click on the MAC address column then the system will show the detail technical information for each wireless station.

The page below describes the detail connection information with each station. You can get all information needed right here.

Image 15
Contents 802.11g Wireless LAN Outdoor CPE AP Copyright Safety Table of Contents Page Introduction Package ContentsFeatures SpecificationWireless Performance Environmental factors Site selectionHardware Installation Outdoor Installation Warning DON’T Touch That PERSON, or YOU MAY be Electrocuted Initial Setup Setup ProceduresClick on Start Menu/ Run Page System Information Web ConfigurationAccess Point Mode System SummaryWireless Station List Current IP SettingsCurrent Wireless Settings Device Name AdministrationOperation Mode System PropertiesIP Settings Wireless Network Wireless SecuritySsid WEP Authentication typeWPA-PSK Radius secret WPARadius server Radius portWireless Advanced Settings RTS/CTS threshold Protection modeFragment length 256-2346Backup / Restore Settings Default settings Current settings immediatelyMAC Filter Reboot Firmware UpgradeConnection Status Wireless Client ModeBssid Site Survey Network modeEthernet Client List Repeater ModeWireless Network WDS Link Settings Wireless BridgeConsiderations before installation WDS Security SettingsAppendix a Glossary