Planet Technology WAP-6100 user manual IP Settings

Administrator Name	You change the administrator login name in this field.
Password	Type the new password here if you need to change it.
Confirm Password	Re-type the new password again, then click the “Apply” below to save the
	changes.

4.1.5 IP Settings

This page can configure system IP address. Default IP address is 192.168.1.1 and Subnet Mask is 255.255.255.0. You can manually input IP address setting or get an IP from a DHCP server.

IP Network Setting	Here you can choose to get IP from a DHCP server or specify IP address
	manually. Choose to obtain an IP address from DHCP server if your
	environment or ISP provide DHCP server. Otherwise, you must manually setup
	IP address.
IP Address	If you select “Specify an IP address”, you must enter a unique IP address here.
IP Subnet Mask	The Subnet Mask must be the same as your Ethernet network setting.
Default Gateway	Enter the IP address of your gateway here. If your network does not have a
	Gateway, you can leave this field blank.