Powerware IPK-0319, IPK-0320, IPK-0318 manual Connecting the BestLink SNMP/WEB Adapter

Local Configuration

Connecting the BestLink SNMP/WEB Adapter

To connect the adapter to the terminal and start the configuration program:

1.If configuring an external BestLink Adapter, connect the supplied serial cable labeled “PC” to the PC port on the BestLink Adapter (see Figure 4).

If configuring an internal BestLink Adapter, connect the serial cable supplied with the UPS (INT-0062) to the communication port on the UPS (see Figure 5).

External BestLink Adapter

Serial cable labeled “PC” to COM port of PC or TTY port of terminal

Figure 4. Cable Connection with External BestLink Adapter

Internal BestLink Adapter

Serial cable (INT-0062) from

UPS to COM port of PC or

TTY port of terminal

Figure 5. Cable Connection with Internal BestLink Adapter

2.Plug the other end of the serial cable into the serial port on your computer or terminal.

3.Verify that both DIP switches on the adapter are set to the 0 (off) position.

8 BestLink SNMP/WEB Adapter User’s Guide : LTM-1343 B Draft 10/03/2001