Powerware IPK-0320, IPK-0318, IPK-0319 manual Appendix, Technical Specifications

Page 33

C H A P T E R 6

APPENDIX

The appendix contains the BestLink Adapter specifications, components and diagrams, pin assignments, upgrading the firmware, service and support, and the warranty.

Table 2. Technical Specifications

CPU

AMD Am188ES - 20 MHz

 

Memory

512k x 8 Static RAM

 

 

512k x 8 Flash ROM

 

LAN Controller

DAVICOM

 

Network Connection

10BaseT RJ-45 network connector

 

UPS Protocol

Powerware-supplied UPS communication device driver

 

Network Protocol

HTTP over TCP/IP

 

 

SNMP over UDP/IP

 

 

SMTP, ARP, RARP, and TFTP

 

 

DHCP

 

 

Supported MIB

MIB_II and BestLink_MIB (bestpwr2.mib)

 

OS Supported for Shutdown

Microsoft Windows 95/98/NT/2000; Novell NetWare; Various UNIX versions

 

Operating Temperature

0–40 °C

 

 

Operating Humidity

10–80%, noncondensing

 

Power Input

External:

12 Vdc unregulated (supplied with the appropriate power supply)

 

 

Internal:

9 Vdc unregulated

 

Power Consumption

External:

2.0 watts

 

(maximum)

Internal:

1.5 watts

 

Size

External: 134 mm x 81 mm x 33 mm

 

 

Internal: 130 mm x 60 mm

 

Weight

External:

170 gm

 

 

Internal:

80 gm

 

Regulatory

FCC Part 15, CISPR A, UL, cUL, and CE

 

BestLink SNMP/WEB Adapter User’s Guide : LTM-1343 B Draft 10/03/2001

27

Image 33
Contents Bestlink SNMP/WEB Adapter Requesting a Declaration of Conformity Class a EMC StatementsFCC Part EN50091-2 Page Page Table of Contents Appendix Introduction System Application BestLink SNMP/WEB Adapter System Application DiagramInstalling the Internal BestLink Adapter InstallationInstalling the Internal BestLink Adapter Installing the External BestLink AdapterInstalling the External BestLink Adapter Configuration Configuring the Adapter LocallyConfiguring the Adapter Remotely Before You Start Local ConfigurationCable Connection with External BestLink Adapter Connecting the BestLink SNMP/WEB AdapterBestLink SNMP/WEB Adapter Main Menu Screen SNMP/WEB Adapter Settings Screen Configuring the AdapterExiting the Configuration Program Set Write Access Managers Set the IP Address, Gateway Address and MIB System GroupSet SNMP/WEB Card Control Group Set Trap Receivers Set UPS InformationSet IP Addresses of Primary and Secondary Date Server UPS Event ActionsSet Superuser Name and Password Mail NotificationBack to Main Menu Remote Configuration Add a Routing Condition in the PCRoute add 192.168.7.18 BestLink Adapter Home Running the Web BrowserSetup Network Configuration Remote Configuration UPS Power Management UPS Management from a Web BrowserBecoming a Superuser Forcing the UPS to Shut Down Turning the UPS On and OffPlanning a Scheduled UPS Shutdown and Restart Configuring E-mail NotificationUPS Shutdown Schedule Mail NotificationPerforming a Manual UPS Battery Test Scheduling a UPS Battery TestSelect Battery Test Schedule UPS Management from an Snmp NMS Viewing the UPS History LogsViewing the UPS Status with CheckUPS-like Applet Receiving Event Traps Viewing UPS Monitoring ParametersAutomatic Shutdown of UPS-Protected Computers UPS Power Management Appendix Technical SpecificationsExternal BestLink Adapter Rear Panel Adapter ComponentsDIP Switch Modes DIP Switch DescriptionLED Description LED DefinitionsPin Assignments Serial Cable Definition External BestLink Adapter to UPS Serial ConnectionExternal BestLink Adapter to PC Serial Connection Upgrading the BestLink Adapter Firmware 852-2830-3030 Service and SupportExtended Service Coverage Two-Year Limited Warranty US and Canada OnlyForce Majeure International Limited WarrantyAppendix Page LTM-1343 B