Powerware UPS 1000 - 2200 user manual Special Symbols

Page 6

Special Symbols

The following are examples of symbols used on the UPS to alert you to important information:

RISK OF ELECTRIC SHOCK - Indicates that a risk of electric shock is present and the associated warning should be observed.

CAUTION: REFER TO OPERATOR’S MANUAL - Refer to your operator’s manual for additional information, such as important operating and maintenance instructions.

RJ-45 RECEPTACLE - For 230V units only: this receptacle provides network interface connections. Do not plug telephone or telecommunications equipment into this receptacle.

This symbol indicates that you should not discard the UPS or the UPS batteries in the trash. The UPS may contain sealed, lead–acid batteries. Batteries must be recycled.

Image 6

Contents UPS 1000 2200 VA User’s Manual Page Powerware 5125 User’s Manual 1000-2200 VA Table of contentsCopyright Requesting a Declaration of Conformity Class a EMC Statements VA ModelsSpecial Symbols Powerware 5125 Introduction PowerwareInstallation Installing the UPSInspecting the Equipment Installation UPS Rear PanelsOperation and Configuration Operating ModesStandby Mode Normal ModeBuck and Double Boost Mode UPS Configuration Battery ModeSleep Mode Starting the UPS on BatteryTurning the UPS Off Initiating the Self-TestCommunication Port Network Transient Protector Network Transient ProtectorLoad Segments VA and 1500 VA Load SegmentsWhen to Replace Batteries UPS MaintenanceUPS and Battery Care Storing the UPS and BatteriesHow to Replace Extended Battery Modules Use the following procedure to replace internal batteries Testing New Batteries Troubleshooting Recycling the Used BatteryAudible Alarms and UPS Conditions Silencing an Audible Alarm Alarm or Condition Possible Cause Action100% Specifications Dimensions W x D x H WeightBattery