Powerware UPS 1000 - 2200 user manual How to Replace Extended Battery Modules

Page 17

How to Replace Extended Battery Modules

Use the following procedure to replace EBMs:

1.Unplug the EBM cable from the UPS.

2.Replace the EBM. See “Recycling the Used Battery” on page 20 for proper disposal.

3.Plug the new EBM into the UPS as shown in Figure 12.

4.For additional EBMs, plug the EBM cable of the second cabinet into the battery connector on the first EBM.

Figure 12. EBM Connections

How to Replace Internal Batteries

CAUTION

Pull the battery out onto a flat, stable surface. The battery is unsupported when you pull it out of the UPS.

1019297	1000 - 2200 VA	17
Revision A	User’s Manual

Image 17

Contents UPS 1000 2200 VA User’s Manual Page Table of contents Powerware 5125 User’s Manual 1000-2200 VACopyright Class a EMC Statements VA Models Requesting a Declaration of ConformitySpecial Symbols Powerware Powerware 5125 IntroductionInspecting the Equipment InstallationInstalling the UPS UPS Rear Panels InstallationOperating Modes Operation and ConfigurationBuck and Double Boost Mode Standby ModeNormal Mode Sleep Mode Battery ModeUPS Configuration Starting the UPS on BatteryCommunication Port Turning the UPS OffInitiating the Self-Test Network Transient Protector Network Transient ProtectorVA and 1500 VA Load Segments Load SegmentsUPS and Battery Care UPS MaintenanceWhen to Replace Batteries Storing the UPS and BatteriesHow to Replace Extended Battery Modules Use the following procedure to replace internal batteries Testing New Batteries Audible Alarms and UPS Conditions TroubleshootingRecycling the Used Battery Alarm or Condition Possible Cause Action Silencing an Audible Alarm100% Dimensions W x D x H Weight SpecificationsBattery