Quantum LTO-3 manual Regulatory Compliance, Reliability

Page 62

Chapter 5 Specifications

Regulatory Compliance

Cartridge Memory Each Ultrium cartridge has 4 Kbytes of nonvolatile memory: 3 Kbytes are used to store tape-directory and hardware specific information. 1 Kbyte is available for application and OEM use. The cartridge memory is powered, read, and written to via a radio-frequency link.

Cartridge

Recommended cartridge use: After 5,000 load/unload cycles, replace the

Reliability

cartridge to insure data integrity.

Regulatory Compliance

These drives comply with the safety and EMC regulations listed in the following tables.

Safety Compliance

Country

Regulatory Organization

Compliant to:

 

 

 

United States

Underwriters Laboratories (UL)

UL 1950 – 3rd edition

 

 

 

Canada

Canadian Standards

CSA 22.2 950–95

 

Association (CSA)

 

 

 

 

Germany

Technischer Überwachungs-

IEC 950 / EN60950, (including

 

Verein (TUV) Rheinland

amendments A1, A2, A3, A4,

 

 

A11)

 

 

 

Mexico

Normas Oficiales Mexicanas

NOM standards

 

(NOM), similar to UL

 

 

 

 

Singapore

Productivity and Standards

PSB safety certification

 

Board (PSB)

 

 

 

 

South Korea

JEON

JEON safety certification

 

 

 

Argentina

Instituto Argentino de

IRAM safety certification China

 

Racionalization de Materiales

 

 

(IRAM)

 

 

 

 

48

LTO-3 Tape Drive User’s Guide

Image 62
Contents 72 Copyright Statement Contents Chapter Operation Chapter Specifications Chapter Troubleshooting Guide Figures Figures Viii Tables Tables Purpose PrefaceAudience Notational Conventions DocumentOrganization Documents SCSI-2 SpecificationRelated ContactsCustomer Support Technical PublicationsQuantum Home 1Overview, Unpacking Instructions and Quick Start OverviewDrive Configurations FeaturesUnpacking and Inspection Tape Drive Quick Quick Start GuideInternal LTO-3 StartInternal Tape Drive Guidelines and Cautions Desktop LTO-3LTO-3 Tape Drive User’s Guide 2Installation Drive Installation InstructionsLVD Drive Installing an Internal LTO-3 Tape DriveConfiguring an Jumper Settings JumpersTerminator Power Mounting Internal LTO-3 Tape Drive Acceptable Mounting OrientationsADI Fixed Board Connector Internal LTO-3 Tape Drive Mounting DimensionsConnector ADI Free CableADI Free Cable Connector Rear View of the Internal LTO-3 Tape drive Connecting a Serial Cable for Tape Libraries Pin Number DescriptionConnection Name Type Driven By Connection Definition Installing a Desktop LTO-3 Tape Drive Connecting a Power Cable Installing the LTO DriverInstallation Installing a Desktop LTO-3 Tape Drive Scsi Termination Examples for the Desktop LTO-3 Tape Drive Commercial backup application software Installation Installing a Desktop LTO-3 Tape Drive 3Operation Understanding the Front Panel Display Shows a view of the LTO-3 front-panel displayBlink Codes EOTUsing LTO Cartridges Loading a Cartridge Unloading a CartridgeWrite-protecting a Cartridge Cartridge Care Drive MaintenanceMaintenance Operation Drive Maintenance Using the Load/ Unload Button to Park the Drive Parking the Drive for Shipping4Theory Track LayoutShows the layout of data on an LTO tape Data Integrity Recording MethodData Buffer C1 ECC Servo-tracking FaultsData Compression Data Compression Considerations Intelligent Data CompressionTheory Data Compression 5Specifications Physical Specifications Shows the dimensions of the internal LTO-3 Tape Drive Power Specifications Specification +12 VDC + 5VDCDrive Performance Specifications Specification ValueSpecification Operational Non-operational Environmental RequirementsReliability Injected NoiseSpecification Description Mean Time Between FailuresReplace LTO Cartridge SpecificationsMean Time to EnvironmentalRegulatory Compliance ReliabilityCountry Regulatory Organization Compliant to IeceePREDOM-OBR Disposal of Electrical and Electronic Equipment LTO-3 Tape Drive User’s Guide 6UNIX Settings Configuring for the DEC/Compaq Unix Environment Word About Scsi ControllersFinding Current TargetsControllers ConfiguringTypes Device File st.confLTO-3 Tape Drive User’s Guide Finding Existing Configuring LTO-3 Tape DrivesUsing Smit Configuring for SCO Open Server This command produces output similar toConfiguring the LTO-3 Tape Drive with mkdev Configuring for Linux Finding Existing Scsi Controllers DevicesYou may see output similar to Configuring for SGI Irix For Irix 6.4/6.5Hardware/Driver Configuring for HP-UXConfiguration Unix Settings Configuring for HP-UX Unix Settings Configuring for HP-UX 7Troubleshooting Guide Installation Best PracticesDo Not Troubleshooting Suggestions Internal tape drive Desktop tape driveWindows Operating System Problems with Tape Drive and Cartridge Red Hat Linux Tape will not Load into Tape DriveTroubleshooting Guide Troubleshooting Suggestions Tape will not Eject from the Drive Backup Failures OVERWRITTEN. ALL Previously Written Data on the Tape will Tape is Write Protected Miscellaneous TapeAlert MessagesLTO-3 Tape Drive User’s Guide Slow Backups Troubleshooting Guide Troubleshooting Suggestions Index Intelligent 37 Data integrity Scsi ID Tape drive not recognized by operating system or application