SUPER MICRO Computer SCF418IF-R1K62BP Assembling the Pcie Slot Bracket and Riser Card

SCF418 Chassis Manual

PCIE Slot

Bracket

Riser Card	Card
	Mounting
	Screws

Figure 5-24: Assembling the PCIE Slot Bracket and Riser Card

Assembling the PCIE Slot Bracket Assembly

Each node supports one expansion card. This expansion card must be plugged into a riser card, which in turn plugs into the motherboard.

Assembling the PCIE Slot Bracket Assembly

1.Remove the node from the chassis as described in Section 5-2, remove the node from the chassis as described in Section 5-4 and remove the cover from the node as described in Section 5-5.

2.Open the PCIE slot clip and remove the PCIE slot shield. (See the illustration on the previous page)

3.Remove the three mounting screws securing the PCIE slot bracket to the node.

4.Lift the PCIE slot bracket out of the node.

5-24