SUPER MICRO Computer X9SPU-F Watch Dog Reset JWD, VGA Enable JPG1, Watch Dog JWD Jumper Settings

X9SPU-F Motherboard User’s Manual

Watch Dog Reset (JWD)

Watch Dog (JWD) is a system moni- tor that can reboot the system when a software application hangs. Close Pins 1-2 to reset the system if an ap- plication hangs. Close Pins 2-3 to generate a non-maskable interrupt signal for the application that hangs. See the table on the right for jumper settings. Watch Dog must also be en- abled in the BIOS.

VGA Enable (JPG1)

JPG1 allows you to enable or disable the onboard VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper settings.

Watch Dog (JWD)

Jumper Settings

Setting	Definition
Pins 1-2	Reset (Default)
Pins 2-3	NMI
Open	Disabled

VGA Enable/Disable (JPG1)

Jumper Settings

Setting	Definition
Pins 1-2	Enabled (Default)
Pins 2-3	Disabled

JPG1	JWD
KB/MS
USB4/5/IPMI_LAN
	USB3.0-2/3
	COM2
	+
COM1			CPU
VGA	CLEAR
	CMOS		JF1
			+
LAN1		MAC CODE
	REV:1.00	CODE	DIMMA1
			DDR3 1600/1333/1066 UDIMM/RDIMM required
LAN2	X9SPU-FDESIGNED IN USA	BAR	DIMMA2
			DIMMB1
UID-LED	JSD1:DOM PWR
			DIMMB2
	SBX2: PCI-E 2.0 X4 in X8
UIOP	SBX1: PCI-E 3.0/2.0 X16 or X8+X8		SBX3: PCI-E 2.0 X4
			USB 12/13	USB 3.0-0/1

2-28

FAN1

FAN2

FAN3

FAN4

FAN5