SUPER MICRO Computer FAN0103L4 user manual Configuring the Storage Module, Storage Module Options

Chapter 4: Chassis Setup and Maintenance

4-6 Configuring the Storage Module

Storage Module Options

The storage module can be configured to accommodate a variety of data storage devices such as CD, IDE, DVD and floppy drives. The chassis may be rotated from a vertical tower position, to a horizontal rack mounting position to accommodate use of these devices. The following configurations may be used in the SC743 chassis:

•5.25" Drives: Install any combination of three 5.25" devices.

•3.5" Drives: Install three 3.5" fixed hard drives in a 5.25" peripheral drive bay, or install five hot-swappable hard drives by using an M35 mobile rack inside the storage module.

•Tower Configuration: Rotate the chassis into an upright tower position. Remove the storage module, rotate it 90 degrees and reinstall it back into the chassis.

•Mobile Rack: Remove the storage module and replace it with either the CSE- M35TQ or CSSE-M35S mobile rack.

Removing the Storage Module

1.Locate the release tab on top of the storage module as shown below. Press the release tab to unlock the storage module.

2.Once unlocked, push the module forward and out of the chassis.

1

2

Figure 4-6: Removing the Storage Module

4-7