
Apppendix C:
Installation Procedures
Installing the CSE-M35S Backplane
1.SCSI IDs are assigned automatically by the backplane. Do not set IDs man- ually on the drives. See the previous section for SCSI ID jumper settings.
2.SCSI termination is enabled by default on the SCSI backplane.
Accessing Hot-Swappable Drives
1.Push the release button located beside each drive's LED.
2.Lift up on the drive's handle.
3.Carefully pull the drives out of the storage module.
2
1
Release Buttons
Figure C-3: Releasing the Drives
3