SUPER MICRO Computer FAN0103L4 user manual Installing the Driver

SC743 Chassis Manual

4-13 SCSI (Super) GEM Driver Installation Instructions for Windows OS

Note: This driver is not necessary for other operating systems. If you have two SCA backplanes, you will need to install the driver twice. The driver is located on the Super Micro motherboard driver CD or may be downloaded from the Supermicro ftp site: ftp://ftp.supermicro.com/driver/Qlogic/

Follow the procedure below to install this driver onto your system.

Installing the Driver

1.Right click on the My Computer icon and choose Properties.

2.Select the Hardware tab and click on Device Manager.

3.Open System Devices or browse to the location of GEM318.

4.Right click on this device and select Properties.

5.Click on Driver tab and select Update Driver.

6.Click the Next button twice.

7.Uncheck both options for Floppy Disk Drives and CD-ROM Drives.

8.Select Specify a Location and click the Next button.

9.Click on the Browse button and select the drive containing the Supermicro Setup CD.

10.Select the Qlogic folder and click on the Open button.

11.System will automatically detect GEM318 and install the drive from this point on.

Or, use the following procedure:

4-20