Soho SR2000 user manual Installing HDD in the Removable Carrier

2-5 Installing HDD in the Removable Carrier

Set Master/Slave jumpers to MASTER (factory default). Connect the power cord and the Removable Carrier’s EIDE/IDE interface cable to the HDD.

Inset the HDD into the Removable Carrier.

Fasten the HDD with the attached 6#-32 screws in their four locations. Place the power cord and the EIDE/IDE interface cable lower than the surface of the HDD in order to avoid any hindrance when taking out the HDD. Please refer to the following illustration.

6#32– 4 screws

12 SOHO RAID