3.First follow the reverse order of the steps described in Section
4.Insert the Removable Carrier with the new HDD into the SR2000.
5.Wait a moment. The SR2000 will automatically perform rebuild function on the new HDD. (Refer to Chapter 4 Automatic Rebuild Function)
6.Use a sharp pointed object to turn on the buzzer on the front panel. The Access LED on the lower part of the panel will be off. (Refer to Note 2).
7.After the rebuild process is over, any data on the newly installed HDD will be overwritten.
Note1：Alarm functions when buzzer switch is "On".
Note2：Buzzer access LED displays red when buzzer switch is "Off".
16 | SOHO RAID |