Soho SR2000 user manual Soho RAID

Page 23

Turn off power

3.After confirmation, the LCD will display options for BACK UP Mode and the cursor will blink and display “F.” Use key selector to choose File, Sector, or Auto mode. Every time you press the selector key, cursor will move to next mode and blink; cursor sequence is F→S→A→F.

4.Press down SELECT key for 5 seconds to enter the selected mode.

Copy Mode?

File Sector Auto

5.SR2000 will confirm the selected mode. Cursor blinks and displays “Y” Select YES or NO with Key selector. Every time the SELECT key is pressed, cursor moves to the next option in the sequence Y→N→Y. When the selected mode is confirmed, press down SELECT key for 5 seconds to enter the selected option.

Ready to start ?

Yes / No

6.If "No" is selected, the LCD will show the following to confirm operation, If "Yes" is selected, refer to next sections.

Copy Aborted !

Continue/Quit

22

SOHO RAID

Image 23
Contents P99649 Soho RAID SR2000Introduction Introduction 1Functions and Features3System Requirements and support Product Specifications4Note Read carefully before using SR2000 Soho RAID 1Package Contents InstallationFront Panel 2Part DescriptionBack Panel Press 4How to remove/insert the Removable Carrier Push Turn to the end Installing HDD in the Removable Carrier 6Installing the SR2000 in your Computer RAID Use 1Factory Default2Installation Installing one new HDD in Auto-Rebuild mode Soho RAID Automatic Rebuild Function A.R.F 1Installing an extra HDD for rebuilding Soho RAID 2LCD display showing HDD status Soho RAID Rev200 Manual Back UpSoho RAID 1File Copy Iiiii XXX % Sector Copy3Auto Copy Sector Copy ProcedureSoho RAID Brand Type Model Capacity Name Certified HDD for SR2000Questions & Answers Q5 The buzzer alarm keeps sounding during SR2000 operation Soho RAID Appendix