8.Normal HDD mode for SR2000 is Ultra DMA. In the event of failure to work with EIDE connector, HDD will automatically configure itself in PIO mode 4 or with lower speed.
9.There is a 6mm Ball Bearing Fan integrated in the SR2000 to prevent overheating for 7200 rpm HDD. When two 7200rpm Hard Disks are installed in a very busy server, we suggest adopting a PC case with optimal design for overheating prevention in order to avoid PC or RAID crashes.
10.In case of power failure during the
11.In case of power failure during Back up, restart Back up when power is restored.
12.Under normal conditions, set Operation Mode Switch to NORMAL position, or else your PC will not detect the SR2000 and it will have to be reset.
5 | SOHO RAID |