While data is in the HDD on the upper deck of the SR2000, start up the computer. The computer system will automatically check the status of the HDD on the upper deck of the SR2000. In case of failure, the buzzer will sound and the LCD will show the following:
Pri HDD Fail
Sec HDD OK
1.Set up a new HDD on the lower deck of the SR2000. If the HDD is properly set up, the LCD will show the following:
Pri HDD | OK |
Sec HDD | OK |
|
|
2. A few seconds later, the LCD will show:
Rebuilding …
Sec 耟Pri XXX%
The data in the lower deck’s HDD will be rebuilt in the upper deck’s HDD.
XXX%: Percentage completed, ranging from 0~100.
3.When the rebuild function is completed, the LCD will show:
Pri HDD | OK |
|
Sec HDD | OK |
|
|
|
|
19 |
| SOHO RAID |