File Copy Procedure
1.After entering File mode and starting operations, the LCD will show the following:
Copy is being processed…
2.A few seconds later, the LCD will show the completed percentage of the process:
IIIII | 1/N |
| XXX % |
I: 1% is completed.
N: number of HDD partitions, ranging from 1~N.
XXX%: Percentage completed, ranging from 0~100.
3.The LCD will show the following after completing File Copy:
Copy is done !!
The LCD will blink and the HDD Access LED on the front panel will turn green.
4.To continue operations, please turn off the power and start PC again.
5-2 Sector Copy
Supports UNIX, LINUX, Free BSD, NetWare, and Mixed. For Sector Copy, use source disk and target disk of the same brand name and model.
Shouldn’t you have two identical disks, please use disks with the same number of disk heads. (EX:an ordinary HDD has 16 disk heads)
On same specifications disks, copy by means of
24 | SOHO RAID |