Chapter 5 Manual Back Up
Manual back up shall be performed from the upper deck (SOURCE) to the lower deck (TARGET). Do not invert the sequence.
Target HDD can be a brand new or an unformatted HDD. Open the front panel during use, set Operation Mode Switch to BACK UP position in the upper right corner of control panel. (Press down)
Insert the SR2000 into your computer. Turn the power on. If you have an external SR2000, insert DC power plug into the outlet on the back panel of SR2000.
No interface card is required for computer connection. When the yellow HDD Access LED on the front panel is on, system enters BACK UP mode. Follow the instructions displayed on the LCD for options and operations.
BACK UP mode won’t be completed unless you turn the power off, Shortcut keys will be ineffective during the BACK UP process.
BACK UP Procedure
1.When the SR2000 is turned on, the LCD will show its model name and version number as follows:
SR2000
SOHO RAID Rev200
2.The SR2000 will auto detect the installation of Hard Disks. When the Source HDD capacity is larger than the Target one, the LCD will alternately display the two screens below and the Buzzer will sound; please turn off the power and start your PC again.
Wrong Capacity
Please Check!
21 | SOHO RAID |