Soho user manual 6Installing the SR2000 in your Computer

2-6Installing the SR2000 in your Computer

Turn the power off.

Make sure there are two 5-1/4" Expansion bays available for the SR2000.

Set up MASTER or SLAVE positions of SR2000 according to your needs. (Factory default: Master). If you need to set it to SLAVE, please modify the jumpers on the back panel of the SR2000.

Remove computer case and insert the SR2000 into the Expansion bay.

Connect power cord and EIDE/IDE interface cable to the right connector.

Fasten SR2000 at four places with attached M3×6mm screws, according to the following illustration. Replace and fasten computer case.

M3x6 mm

8 pcs

13 SOHO RAID