SMC Networks SMCWTK-G manual Point-to-Multipoint PMP Mode, PMP Wireless Bridge

Page 20

3.1.4 Point-to-Multipoint (PMP) Mode

ASMCWTK-G device operating in Point-to-Multipoint (PMP) mode can wirelessly connect two or more wired networks, as shown in Figure4. The root SMCWTK-G device (LAN

1)operates in PMP mode, and the other SMCWTK-G devices (LAN 2, LAN 3) must operate in P2P mode.

When operating in PMP mode, the SMCWTK-G device does not allow client associations. The user must enter the MAC addresses of each (up to six) SMCWTK-G P2P device into the PMP system's table of Remote AP addresses.

Figure 4: PMP Wireless Bridge

Image 20

Contents Page Copyright TrademarksCompliances Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Industry Canada Class BEC Conformance Declaration Intended for use in the following countriesWichtige Sicherheitshinweise Germany EZ Connect g 2.4GHz 802.11g Wireless Traveler’s Kit IntroductionSystem Requirements FeaturesPackage Contents Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Introduction to Operating Modes Traveler’s AP Mode Operating ModesRepeater Mode One Wireless Repeater NodePoint-to-Point P2P Mode P2P Wireless BridgePoint-to-Multipoint PMP Mode PMP Wireless BridgeClient Mode Client in Infrastructure ModeComments Wireless Security SupportWireless Security Mode Mode Selection ModeAP Setup Basic SetupSecurity Setup AP Setup Field DescriptionWEP Configuration WEP Setup Field Description WPA ConfigurationWPA Setup Field Description Advanced Settings Advanced SettingsAdding a Repeater Access FilterAP Advanced Settings Field Description Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description Point-to-Point P2P Setup P2P SetupP2P Advanced Settings Field Description Point-to-Multipoint PMP Setup PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Mode Setup Client Bridge SetupMAC Cloning Field DescriptionStatus StatusAdmin Firmware UpgradeUpdate Password RebootReset to Default Setting LAN LAN Scan/Configuration Utility Configuration UtilityTelnet Management Telnet Step-by-StepCommand Reference Table Get site Product Specifications Management and Configuration Operation ModeDC Power Adapter Operating TemperatureWeight SizeFor Technical SUPPORT, Call