SMC Networks SMCWTK-G manual MAC Cloning, Field Description

Page 43

Table 18: Client Bridge Setup

Field	Description

Station Mode	Selects 802.11g/b mode:
	802.11b only or 802.11g/b

	Wireless Network Name. You can enter it directly in this
SSID	field or click the Site Survey button to select from a list of
	available networks.
Channel	Selects the channel (Ad-Hoc network only)

Operation Mode	Selects Ad-Hoc or Infrastructure mode

Security	Selects the option to disable security or to use WEP or WPA

	security. If using WEP or WPA, click the Setup button to enter the

	key(s).

Preamble Type	Selects short or long preamble

Transmit Rate	Selects the transmit rate: a fixed rate or Auto

10.2 MAC Cloning

To enable MAC cloning mode, go to the MAC Cloning field on the LAN page and select Enabled. MAC cloning clones all the MAC addresses of the devices connected to the Ethernet (wired) port to a single MAC address sent out wirelessly to an AP or Repeater.

Image 43

Contents Page Trademarks CopyrightIndustry Canada Class B CompliancesFederal Communication Commission Interference Statement FCC Radiation Exposure StatementIntended for use in the following countries EC Conformance DeclarationWichtige Sicherheitshinweise Germany Introduction EZ Connect g 2.4GHz 802.11g Wireless Traveler’s KitPackage Contents FeaturesSystem Requirements Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Operating Modes Introduction to Operating Modes Traveler’s AP ModeOne Wireless Repeater Node Repeater ModeP2P Wireless Bridge Point-to-Point P2P ModePMP Wireless Bridge Point-to-Multipoint PMP ModeClient in Infrastructure Mode Client ModeWireless Security Mode Wireless Security SupportComments Mode Mode SelectionBasic Setup AP SetupAP Setup Field Description Security SetupWEP Configuration WPA Configuration WEP Setup Field DescriptionWPA Setup Field Description Advanced Settings Advanced SettingsAP Advanced Settings Field Description Access FilterAdding a Repeater Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description P2P Setup Point-to-Point P2P SetupP2P Advanced Settings Field Description PMP Setup Point-to-Multipoint PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Bridge Setup Client Mode SetupField Description MAC CloningStatus StatusReboot AdminFirmware Upgrade Update PasswordReset to Default Setting LAN LAN Configuration Utility Scan/Configuration UtilityTelnet Step-by-Step Telnet ManagementCommand Reference Table Get site Product Specifications Operating Temperature Management and ConfigurationOperation Mode DC Power AdapterSize WeightFor Technical SUPPORT, Call