SMC Networks SMCWTK-G manual Get site

Page 52

	Get site	Get site

Set command	Set ssid	Set ssid MYSMC_AP0 (SSID: “MYSMC_AP0”)
	Set ssid	Set ssid MYSMC_AP0 (SSID: “MYSMC_AP0”)

	Set Channel	Set channel 12 (Channel: 12)

	Set Security	Set Security 0 (0 is for Disable)

	Set defaultkey	Set defaultkey 1 (Default WEP Key: 1)

	Set wepkey	Set wepkey 1 1234567890 (Wepkey1: 1234567890)

	Set wpakey	Set wpakey smcisgood! (Wepkey: “smcisgood!”)

	Set mode	Set mode 2 (SMCWTK-G change to Repeater mode)

Other command	Logout	Quit the telnet management.
	Logout	Quit the telnet management.

	Save	Save the configuration to the flash

	Finish	Save and reboot

Image 52

Contents Page Copyright TrademarksCompliances Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Industry Canada Class BEC Conformance Declaration Intended for use in the following countriesWichtige Sicherheitshinweise Germany EZ Connect g 2.4GHz 802.11g Wireless Traveler’s Kit IntroductionPackage Contents FeaturesSystem Requirements Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Introduction to Operating Modes Traveler’s AP Mode Operating ModesRepeater Mode One Wireless Repeater NodePoint-to-Point P2P Mode P2P Wireless BridgePoint-to-Multipoint PMP Mode PMP Wireless BridgeClient Mode Client in Infrastructure ModeWireless Security Mode Wireless Security SupportComments Mode Selection ModeAP Setup Basic SetupSecurity Setup AP Setup Field DescriptionWEP Configuration WEP Setup Field Description WPA ConfigurationWPA Setup Field Description Advanced Settings Advanced SettingsAP Advanced Settings Field Description Access FilterAdding a Repeater Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description Point-to-Point P2P Setup P2P SetupP2P Advanced Settings Field Description Point-to-Multipoint PMP Setup PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Mode Setup Client Bridge SetupMAC Cloning Field DescriptionStatus StatusAdmin Firmware UpgradeUpdate Password RebootReset to Default Setting LAN LAN Scan/Configuration Utility Configuration UtilityTelnet Management Telnet Step-by-StepCommand Reference Table Get site Product Specifications Management and Configuration Operation ModeDC Power Adapter Operating TemperatureWeight SizeFor Technical SUPPORT, Call