SMC Networks SMCWTK-G manual PMP Setup Field Description

Page 40

Table 15: PMP Setup

Field

Description

 

 

AP MAC Address

MAC address(es) of the P2P bridges that are connected to

this PMP bridge

 

(1-6)

 

 

 

Mode

Selects 802.11g/b mode:

 

802.11g only, 802.11b only, or Mixed

 

 

Channel

Selects the channel

 

 

 

Selects the option to disable security or to use WEP

Security

security. If using WEP, click the Setup button to enter the

 

key(s).

 

 

Advanced

Click Setup to configure advanced settings.

Settings

 

 

 

9.2 Security Setup

To enable security, select WEP from the setup page and click Setup to enter the keys. The following tables describe the security setup options in more detail.

Table 16: WEP Setup

Field

Description

 

 

WEP Length

Selects the WEP key length

 

 

Mode

Selects the WEP key format, ASCII or Hex

 

 

Passphrase

Passphrase used to generate the WEP keys. Click the

Generate button to generate the keys.

 

 

 

Key 1-4

WEP keys

 

 

Default Tx key

Selects the default WEP key (1-4)

 

 

Image 40
Contents Page Copyright TrademarksCompliances Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Industry Canada Class BEC Conformance Declaration Intended for use in the following countriesWichtige Sicherheitshinweise Germany EZ Connect g 2.4GHz 802.11g Wireless Traveler’s Kit IntroductionPackage Contents FeaturesSystem Requirements Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Introduction to Operating Modes Traveler’s AP Mode Operating ModesRepeater Mode One Wireless Repeater NodePoint-to-Point P2P Mode P2P Wireless BridgePoint-to-Multipoint PMP Mode PMP Wireless BridgeClient Mode Client in Infrastructure ModeWireless Security Mode Wireless Security SupportComments Mode Selection ModeAP Setup Basic SetupSecurity Setup AP Setup Field DescriptionWEP Configuration WEP Setup Field Description WPA ConfigurationWPA Setup Field Description Advanced Settings Advanced SettingsAP Advanced Settings Field Description Access FilterAdding a Repeater Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description Point-to-Point P2P Setup P2P SetupP2P Advanced Settings Field Description Point-to-Multipoint PMP Setup PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Mode Setup Client Bridge SetupMAC Cloning Field DescriptionStatus StatusAdmin Firmware UpgradeUpdate Password RebootReset to Default Setting LAN LAN Scan/Configuration Utility Configuration UtilityTelnet Management Telnet Step-by-StepCommand Reference Table Get site Product Specifications Management and Configuration Operation ModeDC Power Adapter Operating TemperatureWeight SizeFor Technical SUPPORT, Call