SMC Networks SMCWTK-G manual Product Specifications

Page 53

Product Specifications

Standard

•802.11g/ 802.11b

Ethernet interface

•RJ45 for 100BaseT with auto-crossover MDI/MDI-X

Data Rate

•802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps

•802.11b:1, 2, 5.5, 11Mbps

Modulation Type

•64 QAM(54Mbps,48Mbps)

•16 QAM(36Mbps,24Mbps)

•QPSK(18Mbps,12Mbps)

•BPSK(9Mbps,6Mbps)

•CCK (11Mbps, 5.5Mbps)

•DQPSK (2Mbps), DBPSK

Radio Technology

•OFDM, DSSS

Output Power

•15 ~ 18 dBm (at nominal temperature range)

Antenna

•2 internal diversity IFA antennas

Range

•Up to 1,155 feet

Receiver Sensitivity

PER< 8% @ length=1024 octets (at nominal temperature range)

•11Mbps: -82 ~ -85 dBm

•5.5Mbps: -85 ~ -88 dBm

•2 Mbps: -88 ~ -91 dBm

•1 Mbps: -91 ~ -93 dBm

Image 53

Contents Page Trademarks CopyrightFederal Communication Commission Interference Statement CompliancesFCC Radiation Exposure Statement Industry Canada Class BIntended for use in the following countries EC Conformance DeclarationWichtige Sicherheitshinweise Germany Introduction EZ Connect g 2.4GHz 802.11g Wireless Traveler’s KitSystem Requirements FeaturesPackage Contents Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Operating Modes Introduction to Operating Modes Traveler’s AP ModeOne Wireless Repeater Node Repeater ModeP2P Wireless Bridge Point-to-Point P2P ModePMP Wireless Bridge Point-to-Multipoint PMP ModeClient in Infrastructure Mode Client ModeComments Wireless Security SupportWireless Security Mode Mode Mode SelectionBasic Setup AP SetupAP Setup Field Description Security SetupWEP Configuration WPA Configuration WEP Setup Field DescriptionWPA Setup Field Description Advanced Settings Advanced SettingsAdding a Repeater Access FilterAP Advanced Settings Field Description Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description P2P Setup Point-to-Point P2P SetupP2P Advanced Settings Field Description PMP Setup Point-to-Multipoint PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Bridge Setup Client Mode SetupField Description MAC CloningStatus StatusFirmware Upgrade AdminUpdate Password RebootReset to Default Setting LAN LAN Configuration Utility Scan/Configuration UtilityTelnet Step-by-Step Telnet ManagementCommand Reference Table Get site Product Specifications Operation Mode Management and ConfigurationDC Power Adapter Operating TemperatureSize WeightFor Technical SUPPORT, Call