SMC Networks SMCWTK-G WPA Setup Field Description, Repeater Advanced Settings Field Description

Page 35

Table 9: WPA Setup

	Field	Description

	Authentication	Selects Pre-Shared Key (PSK) or 802.1x mode
	Method

	Passphrase	WPA key

	Group Re-Key	Group Re-Key interval (seconds)
	Time	Group Re-Key interval (seconds)
	Time

7.3 Advanced Settings

The Advanced Settings page allows you to configure advanced Radio settings. The following table describes the setup options in detail.

Table 10: Repeater Advanced Settings Field

	Field	Description

	Beacon Interval	Beacon interval (in milliseconds)

	RTS Threshold	RTS threshold (in bytes)

	DTIM Interval	DTIM interval

	Protection Mode	Allows user to force 802.11g protection (RTS/CTS) mode
	Protection Mode	off.
		off.

	Transmit Rate	Selects the transmit rate: Auto or a fixed rate

	Preamble Type	Selects short preamble, long preamble or Auto

7.4 Access Filter

The Access Filter page allows you to configure the Repeater to allow or deny association to the Repeater based on the client’s MAC address. Up to 32 MAC addresses can be added to the list. The following table describes the setup options in detail.

Image 35

Contents Page Trademarks CopyrightIndustry Canada Class B CompliancesFederal Communication Commission Interference Statement FCC Radiation Exposure StatementIntended for use in the following countries EC Conformance DeclarationWichtige Sicherheitshinweise Germany Introduction EZ Connect g 2.4GHz 802.11g Wireless Traveler’s KitSystem Requirements FeaturesPackage Contents Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Operating Modes Introduction to Operating Modes Traveler’s AP ModeOne Wireless Repeater Node Repeater ModeP2P Wireless Bridge Point-to-Point P2P ModePMP Wireless Bridge Point-to-Multipoint PMP ModeClient in Infrastructure Mode Client ModeComments Wireless Security SupportWireless Security Mode Mode Mode SelectionBasic Setup AP SetupAP Setup Field Description Security SetupWEP Configuration WPA Configuration WEP Setup Field DescriptionWPA Setup Field Description Advanced Settings Advanced SettingsAdding a Repeater Access FilterAP Advanced Settings Field Description Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description P2P Setup Point-to-Point P2P SetupP2P Advanced Settings Field Description PMP Setup Point-to-Multipoint PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Bridge Setup Client Mode SetupField Description MAC CloningStatus StatusReboot AdminFirmware Upgrade Update PasswordReset to Default Setting LAN LAN Configuration Utility Scan/Configuration UtilityTelnet Step-by-Step Telnet ManagementCommand Reference Table Get site Product Specifications Operating Temperature Management and ConfigurationOperation Mode DC Power AdapterSize WeightFor Technical SUPPORT, Call