SMC Networks SMCWTK-G Adding a Repeater, Access Filter, AP Advanced Settings Field Description

Page 30

The following table describes the setup options in detail.

Table 5: AP Advanced Settings

	Field	Description

	Beacon Interval	Beacon interval (in milliseconds)

	RTS Threshold	RTS threshold (in bytes)

	DTIM Interval	DTIM interval

	Protection Mode	Allows user to force 802.11g protection (RTS/CTS) mode
	Protection Mode	off.
		off.

	Transmit Rate	Selects the transmit rate: Auto or a fixed rate

	Preamble Type	Selects short preamble, long preamble, or Auto

	Connect Repeater	Enables/Disables the use of a Repeater

	Repeater MAC	MAC address of the Repeater, if used
	Address

6.3.1 Adding a Repeater

If a Repeater is used along with the Access Point, go to the Advanced Settings page. Select Enable for the “Connect Repeater” field. Enter the MAC address of the Repeater in the “Repeater MAC address” field.

6.4 Access Filter

The Access Filter page allows you to configure the AP to allow or deny association to the AP based on the client’s MAC address. Up to 32 MAC addresses can be added to the list.

Image 30

Contents Page Copyright TrademarksFCC Radiation Exposure Statement CompliancesFederal Communication Commission Interference Statement Industry Canada Class BEC Conformance Declaration Intended for use in the following countriesWichtige Sicherheitshinweise Germany EZ Connect g 2.4GHz 802.11g Wireless Traveler’s Kit IntroductionFeatures Package ContentsSystem Requirements Page Using the EZ Installation Wizard Page Page Page Page Page Page SMCWTK-G is now ready to use Introduction to Operating Modes Traveler’s AP Mode Operating ModesRepeater Mode One Wireless Repeater NodePoint-to-Point P2P Mode P2P Wireless BridgePoint-to-Multipoint PMP Mode PMP Wireless BridgeClient Mode Client in Infrastructure ModeWireless Security Support Wireless Security ModeComments Mode Selection ModeAP Setup Basic SetupSecurity Setup AP Setup Field DescriptionWEP Configuration WEP Setup Field Description WPA ConfigurationWPA Setup Field Description Advanced Settings Advanced SettingsAccess Filter AP Advanced Settings Field DescriptionAdding a Repeater Access Filter Settings AP Access Filter Settings Field Description Repeater Setup Repeater SetupRepeater Setup Field Description Repeater Advanced Settings Field Description Repeater Access Filter Settings Field Description Point-to-Point P2P Setup P2P SetupP2P Advanced Settings Field Description Point-to-Multipoint PMP Setup PMP SetupPMP Setup Field Description PMP Advanced Settings Field Description Client Mode Setup Client Bridge SetupMAC Cloning Field DescriptionStatus StatusUpdate Password AdminFirmware Upgrade RebootReset to Default Setting LAN LAN Scan/Configuration Utility Configuration UtilityTelnet Management Telnet Step-by-StepCommand Reference Table Get site Product Specifications DC Power Adapter Management and ConfigurationOperation Mode Operating TemperatureWeight SizeFor Technical SUPPORT, Call