EZ CONNECT™ 802.11A WIRELESS ACCESS POINT
LED Indicators
The Wireless Access Point includes three status LED indicators, as described in the following figure and table.
Power |
| Wireless |
| Link/Activity | |
| Ethernet |
|
| Link/Activity | |
LED | Status | Description |
Power | On | Indicates the power is being supplied. |
| Flashing | Indicates - |
|
| • running a |
|
| • loading software program |
|
| • system errors (refer to “Troubleshooting” |
|
| on page 36 for details) |
Ethernet Link/Activity | On | Indicates a valid 100Mbps Ethernet cable |
(Green) |
| link. |
|
| |
| Flashing | Indicates that the Access Point is |
|
| transmitting or receiving data on the |
|
| 100Mbps Ethernet LAN. Blinking rate is |
|
| proportional to your network activity. |
Ethernet Link/Activity | On | Indicates a valid 10Mbps Ethernet cable |
(Amber) |
| link. |
|
| |
| Flashing | Indicates that the Access Point is |
|
| transmitting or receiving data on the |
|
| 10Mbps Ethernet LAN. Blinking rate is |
|
| proportional to your network activity. |
Wireless Link/Activity | On | Indicates a valid wireless link. |
| Very Slow | Searches for network association. |
| Flashing |
|
| Slow | Associated with network but no activity. |
| Flashing |
|
| Fast Flashing | Indicates that the Access Point is |
|
| transmitting or receiving data through |
|
| wireless links. Blinking rate is proportional |
|
| to your network activity. |
4