SMC Networks SMC2755W manual

by the network DHCP server. (Default: Disable)

Note: If there is no DHCP server on your network, then the access point will automatically start up with its default IP address, 192.168.1.20.

By using the Wireless Access Point’s built-in DHCP (Dynamic Host Configuration Protocol) server, you are allowing the Wireless Access Point to handle all the IP addressing on your Local Area Network (LAN). This can save you much of the time and hassle of setting up your network. If you have a server on your network that requires a static IP address, you may still use the “DHCP Server” and manually assign a static IP address to your server. (Default: Disable)

22