SMC Networks manual SMC2755W Rear Panel

SMC2755W - Rear Panel

Reset

Button

	3.3V
	4A MAX
RJ-45	3.3 V DC
Connector	Power Socket

3.Connect the Ethernet Cable – The SMC2755W can be wired to a 10/100Mbps Ethernet through a network device such as a hub or a switch. Connect to the RJ-45 connector socket on the back panel with category 3, 4 or 5 UTP Ethernet cable and an RJ-45 connector.

4.Connect the Power Cable – Connect the power adapter cable to the 3.3 V DC power socket on the rear panel.

Warning: USE ONLY the power adapter supplied with the SMC2755W. Otherwise, the product may be damaged.

7