SMC Networks SMC2755W manual System Configuration

Page 19

SYSTEM CONFIGURATION

3.Click on “Setup Wizard” to display basic configurations including SSID, Channel, Authentication Type and Standard WEP Setup.

4.Click on the “Next” button to start using the “1-2-3 Setup Wizard.”

SSID – The Service Set ID. This should be set to the same value as other wireless devices in your network. (Default: ANY)

Note: The SSID is upper/lower case sensitive and can consist of

11

Image 19

Contents EZ ConnectTM Page EZ ConnectTM User Guide Trademarks CopyrightLimited Warranty Limited Warranty FCC Class B CompliancesIndustry Canada Class B Compliances Package Checklist EZ Connect 802.11A Wireless Access PointHardware Description Radio CharacteristicsEthernet Compatibility Frequently changing environments ApplicationsLED LED IndicatorsSystem Requirements SMC2755W Top Panel Hardware InstallationSMC2755W Rear Panel System Configuration Windows Installation 98/2000/Me/NT/XP Setup Wizard System Configuration EZ Connect 802.11A Wireless Access Point Standard WEP Setup screen. Default Open System Bit Manual Entry Advanced Setup Identification Channel Performance Synchronization Transmit Threshold TCP / IP Settings Page Encryption Authentication TypeAdvanced WEP Setup Using MAC Filter System Change PasswordUpgrade Firmware Factory DefaultStatus AP Configuration Access Point StatusAP SME Station Management Entity Connected Station StatusAP Statistics Station Configuration Station SME Station Statistics Network Configuration and Planning Network Topologies Ad-hoc Wireless LAN no AP or BridgeInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCs Troubleshooting Important Notice Limited-lifetime warrantySpecifications Modulation/Rates Sensitivity dBm SensitivityModulation 15-5.25GHZ 25-5.35GHZ DBm ModulationLED Indicators Power supplyOutput Power WeightStandards SafetyWarranty EmissionsTerminology EZ Connect 802.11A Wireless Access Point Page For Technical SUPPORT, Call