SMC Networks SMC2755W manual Advanced WEP Setup

EZ CONNECT™ 802.11A WIRELESS ACCESS POINT

If Shared Key is enabled, the WEP should be enabled and at least one shared key should be defined. But you can enable WEP, and set the authentication type as open system.

Standard WEP Setup (WEP Default: Disable)

Default Shared Key – Choose the Shared Key that has the encryption string you prefer (Key 1~4).

64-Bit Manual Entry

Key 1~4 - Each Key ID contains 10 HEX digits. All wireless devices must have the same Key ID values to communicate. 128-Bit Manual Entry

Key ID contains 26 HEX digits. All wireless devices must have the same Key ID values to communicate.

152-Bit Manual Entry

Key ID contains 32 HEX digits. All wireless devices must have the same Key ID values to communicate.

Advanced WEP Setup

How to setup the Unique Key WEP:

1.Select a unique key (5 ~ 64)

2.Enter the encryption key and select the proper key size.

3.Click “Write” and “Apply” to save the encryption key.

4.If you want to read an encryption key, select the unique key you want to read, click “read” and “Apply” to read the encryption key.

5.If you want to delete an encryption key, select the unique key you want to delete, click “Delete” and “Apply” to delete the encryption key.

24