SMC Networks SMC2755W manual Synchronization

Page 27

SYSTEM CONFIGURATION

Synchronization

In order to obtain transmission, the Access Point and connected clients need to be synchronized.

Beacon Interval (20-1000): Set the interval value of beacon between synchronized frames. These synchronous frames also contain indication of frames that need to transmit to the power-saved stations. (Default: 100)

DTIM (1-16384): Set the Delivery Traffic Indication Message (DTIM) interval value. The DTIM indicates how often the MAC layer forwards multicast traffic. This parameter is necessary to accommodate stations using Power Save mode. In order to maximize the utilization of channels, broadcast data is not transmitted every beacon for stations in Power Save mode. These power-saved stations must wake up to receive broadcast data at the DTIM interval.

19

Image 27
Contents EZ ConnectTM Page EZ ConnectTM User Guide Trademarks CopyrightLimited Warranty Limited Warranty Compliances FCC Class BIndustry Canada Class B Compliances Package Checklist EZ Connect 802.11A Wireless Access PointRadio Characteristics Hardware DescriptionEthernet Compatibility Frequently changing environments ApplicationsLED LED IndicatorsSystem Requirements SMC2755W Top Panel Hardware InstallationSMC2755W Rear Panel System Configuration Windows Installation 98/2000/Me/NT/XP Setup Wizard System Configuration EZ Connect 802.11A Wireless Access Point Standard WEP Setup screen. Default Open System Bit Manual Entry Advanced Setup Identification Channel Performance Synchronization Transmit Threshold TCP / IP Settings Page Encryption Authentication TypeAdvanced WEP Setup Using MAC Filter System Change PasswordFactory Default Upgrade FirmwareStatus AP Configuration Access Point StatusConnected Station Status AP SME Station Management EntityAP Statistics Station Configuration Station SME Station Statistics Network Configuration and Planning Network Topologies Ad-hoc Wireless LAN no AP or BridgeInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCs Troubleshooting Important Notice Limited-lifetime warrantySpecifications Modulation/Rates Sensitivity dBm SensitivityModulation 15-5.25GHZ 25-5.35GHZ DBm ModulationLED Indicators Power supplyOutput Power WeightStandards SafetyWarranty EmissionsTerminology EZ Connect 802.11A Wireless Access Point Page For Technical SUPPORT, Call