SMC Networks SMC2755W manual System Requirements

Page 13

INTRODUCTION

System Requirements

Before you install the Wireless Access Point, be sure you can meet the following requirements:

•An A/C power outlet (100~240 V, 50~60 Hz) which will supply power for the Access Point

•An available RJ-45 (UTP) port on a 10/100Mbps Ethernet hub or switch

•802.11a compliant wireless Ethernet adapters with TCP/IP compatible protocol installed

•Web browser for configuration

5

Image 13

Contents EZ ConnectTM Page EZ ConnectTM User Guide Trademarks CopyrightLimited Warranty Limited Warranty FCC Class B CompliancesIndustry Canada Class B Compliances Package Checklist EZ Connect 802.11A Wireless Access PointHardware Description Radio CharacteristicsEthernet Compatibility Frequently changing environments ApplicationsLED LED IndicatorsSystem Requirements SMC2755W Top Panel Hardware InstallationSMC2755W Rear Panel System Configuration Windows Installation 98/2000/Me/NT/XP Setup Wizard System Configuration EZ Connect 802.11A Wireless Access Point Standard WEP Setup screen. Default Open System Bit Manual Entry Advanced Setup Identification Channel Performance Synchronization Transmit Threshold TCP / IP Settings Page Encryption Authentication TypeAdvanced WEP Setup Using MAC Filter System Change PasswordUpgrade Firmware Factory DefaultStatus AP Configuration Access Point StatusAP SME Station Management Entity Connected Station StatusAP Statistics Station Configuration Station SME Station Statistics Network Configuration and Planning Network Topologies Ad-hoc Wireless LAN no AP or BridgeInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCs Troubleshooting Important Notice Limited-lifetime warrantySpecifications Modulation/Rates Sensitivity dBm SensitivityModulation 15-5.25GHZ 25-5.35GHZ DBm ModulationOutput Power Power supplyWeight LED IndicatorsWarranty SafetyEmissions StandardsTerminology EZ Connect 802.11A Wireless Access Point Page For Technical SUPPORT, Call