SMC Networks SMC8014W-G manual

3.Click the [Apply] button to save your changes

4.On the Side Navigation bar, click on the [Access Control] link

5.Enable LAN clients that will access the IPSec VPN by adding them to the VPN Access List. There are two ways to add a LAN client to the VPN Access List. Either select the radio button next to an [Auto-Learned CPE Device] or manually enter the LAN clients MAC address in the [Manually-Added CPE Devices] section, then select [Add]

6.On the Side Navigation bar, click on the [IPsec Tunnel Configuration] link

NOTE: There is a VPN Log on this page that displays VPN event messages.

7. Click on the [Add] button to configure the IPSec VPN