SMC Networks SMC8014W-G manual Rear Panel Description, Reboot, Restore Factory Defaults

Page 7

Rear Panel Description

Power

Reset

Button

LAN

Ports

CATV

Connector

USB

Item	Description
Power	Connect the included power adapter to this port.
Reset	Use this button to reset the power or restore the default factory settings.
LAN 1-4	Four 10/100 Auto-sensing switch ports (RJ-45). Connect devices on your local
	area network to these ports (such as a PC, hub, or switch).
USB	Connect a USB Cable from your PC to this port.
CATV	Connect your cable line to this port.

Rebooting and Restoring the EZ Connect™ Wireless Cable Modem Gateway

The Reset button is located on the rear panel of the Gateway. Use a paper clip or a pencil tip to push the Reset button.

Reboot

If the Gateway is having problems connecting to the Internet, simply hold down the reset button for less than 2 seconds then release.

Restore Factory Defaults

If rebooting the Gateway does not resolve your issue, then you can follow these steps:

1.Leave power plugged into the Gateway.

2.Locate the reset button on the back panel, press and hold button for at least 5 seconds.

3.Release reset button.

Image 7

Contents EZ Connect Wireless Cable Modem Gateway Trademarks CopyrightTable of Contents Introduction Features and BenefitsSystem Requirements Package ContentsAmber Getting to Know the EZ Connect Wireless Cable Modem GatewayLED Indicators GreenRestore Factory Defaults RebootRear Panel Description Installation Basic Installation Procedure Configuring Windows 95/98/Me Configuring your ComputerConfiguring Windows XP Configuring WindowsConfiguring a Macintosh Computer Internet Explorer 5.0 or above Configuring the EZ Connect Wireless Cable Modem GatewayBrowser Configuration Disable Proxy ConnectionUser Login for use by subscriber Installer Login for use by cable operator onlySystem Navigating the Web-based AdministrationMaking Configuration Changes Password SettingsPage Telnet Remote Management Port Enable Customer Remote ManagementRemote Management Http Remote ManagementHost Name Remote Management Access RuleDNS Settings WANMAC Spoofing LANDhcp Server Settings Private LAN IP SettingsPrivate IP Address Pool Adding Static Routes RoutingPptp IP Address Pool Static RoutesAuthentication Key & ID only for RIPv2 Update IntervalDefault Metric Authentication Type only for RIPv2Wireless Encryption Channel and SsidWEP MAC Filtering WPA-PSKPort Forwarding NATPredefined Service UDP TCP/UDP Customer Defined Service Rule CustomAccess Control Firewall Enable/DisableFirewall Predefined Filtering Access Rule Customer Defined Filtering Access Rule Custom Special Application URL Blocking Email/Syslog Alert Schedule RulePage Page Tools Configuration ToolsDMZ Host Demilitarized Zone Locally Restore Settings from Configuration File Locally Backup Settings to Configuration FileRemotely Backup/Restore Gateway Settings Diagnostics Create an IPSec VPN Tunnel VPNPage Page Page Create a Pptp VPN Tunnel Create a L2TP over IPSec VPN Tunnel Status Page Appendix a Telnet and SSH CLI Commands Am getting an IP Address that starts with Appendix B TroubleshootingHave another IP Address displayed Good Connection Bad Connection Pinging the EZ Connect Wireless Cable Modem GatewaySymptom Cable LED is Off or Flashing Symptom / Action TroubleshootingSymptom Power LED is Off Symptom Diag LED is OnAction Appendix C Technical Specifications FCC Interference Statement Appendix D CompliancesCE Declaration of Conformity Phone Appendix E Technical SupportPage SMC Networks, Inc Tesla Irvine, CA Rev .0 4.01.05-TWC