SMC Networks SMC8014W-G manual

a.Either the Gateway’s Private LAN IP address or Public LAN IP address can be configured as the end point for the VPN tunnel. Select either [Protect Private Lan] or [Protect Public Lan] to enable the entire Private or Public LAN to be part of the VPN tunnel and the respective Gateway LAN IP address will populate the [Intranet Address] and [Intranet Subnet Mask] fields.

b.Enter the [Local ID] which must match the “Remote ID” of the remote VPN end point.

c.Enter the [Remote Gateway ID] which must match the “Local ID” of the remote VPN end point.

d.Enter the [Remote Gateway Address]

e.Enter the [Pre-shared Key] which must match the “Pre-shared Key” value of the remote VPN end point.

f.Enter the [IKE Life Duration] value