SMC Networks SMC8014W-G manual Package Contents, System Requirements

Page 5

Package Contents

Before installing the EZ Connect™ Wireless Cable Modem Gateway, verify that you have the items listed under below. Also be sure that you have the necessary cabling. If any of the items are missing or damaged, contact your local SMC distributor.

1 - EZ Connect™ Wireless Cable Modem Gateway

1 - Power adapter (12V/1.25A)

1 - CAT-5 Ethernet cable

1 - USB Cable

Installation CD, including:

oUser Guide o USB Drivers

If possible, retain the carton and original packing materials in case there is a need to return the product.

Please register your product on SMC’s web site at http://www.smc.com.

System Requirements

You must meet the following minimum requirements:

Provisioned Internet access from a cable operator that has approved the SMC8014W-G

A computer equipped with a wired or wireless network adapter with TCP/IP installed.

A Java-enabled web browser, such as Microsoft Internet Explorer 5.5 or above, or Netscape Communicator 5.0 or above.

Windows 98 Second Edition or higher is required for USB driver support.

Image 5
Contents EZ Connect Wireless Cable Modem Gateway Trademarks CopyrightTable of Contents Introduction Features and BenefitsSystem Requirements Package ContentsLED Indicators Getting to Know the EZ Connect Wireless Cable Modem GatewayGreen AmberRear Panel Description RebootRestore Factory Defaults Installation Basic Installation Procedure Configuring Windows 95/98/Me Configuring your ComputerConfiguring Windows XP Configuring WindowsConfiguring a Macintosh Computer Browser Configuration Configuring the EZ Connect Wireless Cable Modem GatewayDisable Proxy Connection Internet Explorer 5.0 or aboveUser Login for use by subscriber Installer Login for use by cable operator onlyMaking Configuration Changes Navigating the Web-based AdministrationPassword Settings SystemPage Remote Management Enable Customer Remote ManagementHttp Remote Management Telnet Remote Management PortDNS Settings Remote Management Access RuleWAN Host NameMAC Spoofing LANPrivate IP Address Pool Private LAN IP SettingsDhcp Server Settings Pptp IP Address Pool RoutingStatic Routes Adding Static RoutesDefault Metric Update IntervalAuthentication Type only for RIPv2 Authentication Key & ID only for RIPv2Wireless Encryption Channel and SsidWEP MAC Filtering WPA-PSKPort Forwarding NATPredefined Service UDP TCP/UDP Customer Defined Service Rule CustomFirewall Firewall Enable/DisableAccess Control Predefined Filtering Access Rule Customer Defined Filtering Access Rule Custom Special Application URL Blocking Email/Syslog Alert Schedule RulePage Page DMZ Host Demilitarized Zone Configuration ToolsTools Locally Restore Settings from Configuration File Locally Backup Settings to Configuration FileRemotely Backup/Restore Gateway Settings Diagnostics Create an IPSec VPN Tunnel VPNPage Page Page Create a Pptp VPN Tunnel Create a L2TP over IPSec VPN Tunnel Status Page Appendix a Telnet and SSH CLI Commands Am getting an IP Address that starts with Appendix B TroubleshootingHave another IP Address displayed Good Connection Bad Connection Pinging the EZ Connect Wireless Cable Modem GatewaySymptom Power LED is Off Symptom / Action TroubleshootingSymptom Diag LED is On Symptom Cable LED is Off or FlashingAction Appendix C Technical Specifications CE Declaration of Conformity Appendix D CompliancesFCC Interference Statement Phone Appendix E Technical SupportPage SMC Networks, Inc Tesla Irvine, CA Rev .0 4.01.05-TWC