SMC Networks SMCBR24Q user manual Password

Page 14

SMCBR24Q User Manual

1.Enter the Specify WAN IP Address, Subnet Mask, and Default Gateway Address that is the PPTP server’s IP that resides in the Modem.

2.Enter your Username and Password.

3.If you select Connect on Demand option, the connection will be disconnected if it has been idle for a period longer than the Max. Idle Time setting.

4.If you select Keep Alive option, the Router will keep the connection alive by sending out a few data packets at Redial Period, so your Internet service thinks that the connection is still alive.

For more information, click the Help button. Click the Save Settings button to save the Basic Setup settings or click the Cancel button to undo the changes.

Password

The SMCBR24Q's default password is 'smcadmin', and it is strongly recommended that you change the Router's password. If you leave the password blank, all users on your network will be able to access the Router simply by entering the unit’s IP address into their web browser’s location window.

Page 14

Image 14

Contents Page Table of Contents Dhcp Introduction Main features LED Status Feature ListReset Button ButtonSite Map LoginMode System Summary System InformationUser Usage User BandwidthISP Bandwidth Basic Setup NetworkObtain an IP automatically Static IPEnter your Username and Password Password Confirm New Password Old PasswordNew Password Manual TimeAutomatically MAC Clone Page Remote Internet Passport On-Line SchedulerWeb Site Hit Rate Application Usage Page Performance Optimization Please refer to Q-button-Home Mode To create a new application Block List Web Site Block ListApplication Block List Advanced Setup DMZ HostForwarding Port Range ForwardingPort Triggering UPnP Ddns Advanced Routing Dynamic Routing Static RoutingVPN Pass Through Pptp Pass Through Remote ManagementIPSec Pass Through L2TP Pass ThroughDNS Name Lookup DiagnosticsSystem Management Factory Default PingFirmware Upgrade Import Configuration FileExport Configuration File LogSyslog When system alert, send log immediatelyThere are four buttons follow the setup section MailPage Button in the Home Mode Button, Q-button LED and Q-button iconPage How to Manage SMCBR24Q Soho Mode Site Map System up time ConfigurationSerial Number Firmware versionNetwork Setting Status Firewall Setting Status Log Setting StatusSetup NetworkWAN Connection Type Enter your Username and Password Re-enter the password for confirmation Administrator Inactivity Time-out DMZ Host Forwarding Port Range Forwarding Port Triggering UPnP Ddns Advanced Routing Dynamic Routing Page Setup DhcpPage Dynamic IP Wins ServerSecurity StatusSPI Stateful Packet Inspection DoS Denial of ServiceFirewall Block WAN RequestMulticast Pass Through Access RulesRemote Management MTU Maximum Transmission UnitAdd a new Policy Action ServicesService Destination IP SchedulingSource IP Apply this rule time parameterOn the Forbidden Domains list Content FilterForbidden Domains Scheduling Apply this ruleVPN Pass Through System Management Network Service DetectionWhen Fail Dual WANNetwork Service Detection When Fail Bandwidth Protocol BindingQoS Rate ControlRate Control Priority SummaryDiagnostic DNS Name Lookup Page Factory Default Firmware Upgrade Firmware DownloadSetting Backup System Log General Log Log SettingAlert Log Page System Statistics If any configuration in the QoS page by the UI Button in the Soho ModeIf no configuration in the QoS page by the UI