SMC Networks SMCBR24Q user manual VPN Pass Through

Page 35

SMCBR24Q User Manual

should be zero.

2.Subnet Mask: Enter the Subnet Mask used on the destination LAN IP domain. For Class C IP domain, the Subnet Mask is 255.255.255.0.

3.Default Gateway IP: If this Router is used to connect your network to the Internet, then your Gateway IP is the Router's IP Address. If you have another router handling your network's Internet connection, enter the IP Address of that router instead.

4.Enter hop count (max. 15)

5.Interface: Select LAN, WAN1 or WAN2.

For more information, click the Help button. Click the Save Settings button to save the Advanced Routing settings or click the Cancel button to undo the changes. Click the Show Routing Tables to see the current routing table.

VPN Pass Through

Page 35

Image 35
Contents Page Table of Contents Dhcp Introduction Main features Button Feature ListReset Button LED StatusSite Map LoginMode System Information System SummaryUser Bandwidth User UsageISP Bandwidth Network Basic SetupStatic IP Obtain an IP automaticallyEnter your Username and Password Password Confirm New Password Old PasswordNew Password Manual TimeAutomatically MAC Clone Page On-Line Scheduler Remote Internet PassportWeb Site Hit Rate Application Usage Page Performance Optimization Please refer to Q-button-Home Mode To create a new application Web Site Block List Block ListApplication Block List DMZ Host Advanced SetupPort Range Forwarding ForwardingPort Triggering UPnP Ddns Advanced Routing Static Routing Dynamic RoutingVPN Pass Through L2TP Pass Through Remote ManagementIPSec Pass Through Pptp Pass ThroughDNS Name Lookup DiagnosticsSystem Management Ping Factory DefaultImport Configuration File Firmware UpgradeLog Export Configuration FileMail When system alert, send log immediatelyThere are four buttons follow the setup section SyslogPage Button, Q-button LED and Q-button icon Button in the Home ModePage How to Manage SMCBR24Q Soho Mode Site Map Firmware version ConfigurationSerial Number System up timeNetwork Setting Status Log Setting Status Firewall Setting StatusNetwork SetupWAN Connection Type Enter your Username and Password Re-enter the password for confirmation Administrator Inactivity Time-out DMZ Host Forwarding Port Range Forwarding Port Triggering UPnP Ddns Advanced Routing Dynamic Routing Page Dhcp SetupPage Wins Server Dynamic IPStatus SecurityBlock WAN Request DoS Denial of ServiceFirewall SPI Stateful Packet InspectionMTU Maximum Transmission Unit Access RulesRemote Management Multicast Pass ThroughAdd a new Policy Action ServicesService Apply this rule time parameter SchedulingSource IP Destination IPOn the Forbidden Domains list Content FilterForbidden Domains Apply this rule SchedulingVPN Pass Through Dual WAN Network Service DetectionWhen Fail System ManagementNetwork Service Detection When Fail Protocol Binding BandwidthRate Control QoSRate Control Summary PriorityDiagnostic DNS Name Lookup Page Factory Default Firmware Download Firmware UpgradeSetting Backup System Log General Log Log SettingAlert Log Page System Statistics If any configuration in the QoS page by the UI Button in the Soho ModeIf no configuration in the QoS page by the UI